Steps to Creating the Hillside Slide Natural Playground Step 1: Purchase a slide. First you need to locate or purchase a slide. Step 2: Shaping and Compacting the Soil. Step 3: Cover the Hill with Sod. Step 4: Water, water, water! Step 5: Maintain the Hill. Click to see full answer. In this regard, how do you build a slide into a hill? Steps to Creating the Hillside Slide Natural Playground Step 1: Purchase a slide. First you need to locate or purchase a slide. Step 2: Shaping and Compacting the Soil. Step 3: Cover the Hill with Sod. Step 4: Water, water, water! Step 5: Maintain the Hill. Beside above, how steep Should a slide be? It is recommended that the average incline of a slide chute be no more than 30 degrees. This can be measured by determining that the height to length ratio (as shown in Figure 18) does not exceed 0.577. No span on the slide chute should have a slope greater than 50 degrees. Subsequently, question is, how do I build a hill in my yard? Fill The Area With Clean Dirt To Build Up The Berm Use a garden hose to spray the mound so as to moisten the soil and then tamp it tightly. The fill dirt should take up about half of the total height of your berm. The remaining part should be filled with top soil.How do you make a slide less steep?If the surface is too slick and oily then wash it with water and liquid dish soap using a rag or sponge. This should remove any excess oils or lubricants. If the angle is too steep consider putting a tire or pile dirt under the slide to lessen the angle.