Run 14-2 NM wires throughout the shed and tie them through electrical wire boxes. Attach any desired fixtures in the shed or on outside and run wire as needed. Tie in 14-2 NM wires from fixtures and receptacles into sub panel breakers as needed. Turn off the electricity inside the home at the main breaker panel.Click to see full answer. In this manner, how much does it cost to run electricity to a shed?A licensed electrician would charge at least several hundred dollars plus materials to run lines from your house to a shed 50 ft. away (not including any work inside your house). You can do the job yourself for a materials cost of about $140.Also Know, what kind of wire do I need to run to my shed? You probably want to run a 30 amp (or 50 is better) wire to your shed, and then run smaller breakers in a box of 120 from there to your lights & outlets. It will be _so_ much better to have the air conditioner on 1/2 of the 220, and the other power tools on the other 1/2 of the 220. Regarding this, do I need a permit to run electricity to my shed? Electrical work almost always requires a permit. Make sure you pull permits before starting the work or you could face fines. Call your local building office to learn what documentation you need to provide to receive permit approval.How much does it cost to run utilities to property?In most cases, it can cost anywhere from $10,000-$30,000 to hook up to nearby utilities. Again, the cost will be dependent on your location and proximity to utility connections. Always budget for more than the estimated costs because costs always wind up running over.