However, most building materials that contain asbestos were produced between 1940 and 1990. Asbestos in plaster is far less common than it used to be, but can still be found in many older residential and commercial buildings today.Click to see full answer. Then, what years was asbestos used in plaster?Most types of asbestos-containing plaster were manufactured between 1942 and 1974. If your house was built or renovated during that time, it’s a good idea to have it tested. That said, asbestos was used in stucco and drywall as early as 1910, and use continued at a slower rate until at least the early 1980’s.Also Know, how common is asbestos in drywall? There are six legally recognized types of asbestos, the most common being chrysotile (aka “white asbestos”). Made popular as a key ingredient in drywall, white asbestos accounts for 95 percent of worldwide asbestos use.. Also, do plaster walls have asbestos? Plaster only has to be comprised of 1% asbestos to be considered an asbestos containing material (ACM) and therefore a health hazard. Usually asbestos was only added to walls that were fire rated, such as elevator shaft walls and the walls in commercial buildings. Most houses don’t have asbestos plaster in them.Are plaster walls bad?Some plaster and lath walls are durable and fully usable after decades and many older U.S. homes still have plaster and lath construction. But depending on the quality of installation and the level of maintenance and upkeep, the condition may be worn down or damaged.